You can measure the inseam of your pants by following the steps below.

The measuring method varies depending on the design and crotch stitching, so please choose the one that matches your pants.
 

Pants with a Center Crease

Pants without a Center Crease

Pants with Folded Stitch
＊Have two visible stitch lines on the back center seam (inside) and the fabric edges are rolled into seam



Pants with Interlock Stitch
＊Have overlock stitching visible on the seam allowance at the back center seam (inside)

1. Lay the pants flat so the waist faces left and the right leg lies underneath. (Measure along the inside seam of the right leg)

2. Place the tape measure at the starting point of the crotch seam 



3. Measure along the inside leg seam down to the hem



You can also check the video for guidance:

2. Place the tape measure at the stitch line start in the crotch area and follow the inner seam to the hem



3. Measure along the inside leg seam down to the hem 



If there is curvature, measure in sections, following the curve 

1. Lay the pants flat with the waist to the left and the right leg toward you. (Measure along the inside seam of the right leg)

3. Follow the inner seam down to the bottom 

4. If there is curvature, measure in sections, following the curve



You can also check the video for guidance:

1. Lay the pants flat with the waist to the left and the right leg toward you. (Measure along the inside seam of the right leg）

2. Place the tape measure start point at the crotch area where fabric overlaps and no seam is visible:



3. Follow the inner seam down to the bottom:



If there is curvature, measure in sections, following the curve:

If you wish to learn more about Alteration Service, you may visit this FAQ article: Product | Alteration Service Guide for Online and Physical Store Purchase